Issue: 

When setting the dimension tolerance in ZWCAD, the lower tolerance defaults to "-0" even if "0" is entered.
How to set it to display as "0" without the negative sign？


Solution:

When limit tolerance is enabled, the zero value includes a negative sign by default. To change this status:

  1. In the Tolerances section of the Properties panel, enter any non-zero value for Tolerance lower limit to trigger a status change.


  2. Enter "0" again to display the value correctly without the negative sign.


CN Solution★中望CAD标注下偏差为0且不显示负号
JP Solution


★ZWCAD dimension lower tolerance is 0 and does not display negative sign：https://confluence.zwcad.com/pages/viewpage.action?pageId=315655403