★★How to create the pulley in assembly

Issue:

How to create the pulley in assembly?

Solution:

1. Insert 3 cylinders in assembly.
2. Click the Pulley command in Assembly option.
3. Select the 3 cylinders respectively and set the same direction.
4. Tick the Enable thickness and the Generate pulley part command.
   
5. Double-click to activate the Pulley1Part 
   
6. Click the Extrude command and select the profile.
7. Set the Offset to Thicken and the Inner offset to 2 mm.
8. Click OK to achieve it.
   
9. The effect is as follows.