★★How to set the starting point for the loft sketch profile

Issue:

If the starting points of the loft sketch profiles are different, it may lead to a shape that does not align with the design intent.

How to set the starting point for the loft sketch profile？

Solution:

1. Create sketch on plane with different starting point.
2. Click the Trim/Split at Point command in sketch environment to create a split point.
   
3. The circle changes from well-defined to under-defined after the split.
   
4. Click the Loft command in Shape and select same Start point in different Profile.
   
5. The effect is as follows.