★★How to generate ReadySketch Text according to curved trajectories in ZW3D

Issue:

ReadySketch Text is placed horizontally by default, how to generate ReadySketch Text according to curved trajectories?

Solution:

1. Click the Spline command in the sketch, and then draw a spline.
   
2. Select the spline and right click it, click the Toggle Type command.
   
3. Click the ReadySketch Text command and add the desired texts, and then click Curve command and select the spline, click OK.
   
4. Click the Inlay and select the appropriate Faces and Curves, set the Offset, then click OK.
   
5. The effect is as follows.