★★How to extract the title block data of other drawings into ZWCAD MFG drawing frames

Issue:

How to extract the data from the title block of the original drawing to the title block of the new ZWCAD MFG drawing frame?

Solution:

1. Open the original drawing and create a newly defined ZWCAD MFG drawing frame in the old drawing.
   
2. Double-click on the title block to enter the Title Edit Frame dialog box, and click Extract table data. 
   
3. Select the area to be extracted.
   
4. Enter the Irregular table data extraction dialog box, follow the sequence below, input the Extracting template name, click New to create new configuration, and click on Specify the extract area.
   
5. Extract the title block area of the original drawing.
   
6. Return to the Irregular table data extraction dialog box, follow the sequence shown below, enter the Field area definition name, click New to create new configuration, and click on Specify the extract area.
   
7. Select the fields to extract data and confirm.
   
8. Return to the Irregular table data extraction dialog box, check the extracted content, and continue to extract the remaining content according to the above method until all data is extracted, and then click OK to put extracted data to the new title bar.
   
9. If you want to use the title bar block later, you can use the generated template directly.