Issue:
When attaching dwg as an external reference in ZWCAD, the drawing doesn't match ideally, and the linetype scales are incorrect.
How to solve these problems?
Causes:
- The reference's global scale factor LTSCALE is different from that of the current drawing.
- The reference's insertion unit UNITS is different from that of the current drawing.
- The reference's annotative scale CANNOSCALE is different from that of the current drawing.
Solution:
- 1. Execute the LINETYPE command, or from the Classic menu open the Linetype Manager dialog box.
2. Match the current drawing's Global scale factor with that of the reference drawing. - Execute the UNITS command to open the Drawing Units dialog box, and match the Insertion scale with the current drawing's scale.
- Execute the CANNOSCALE command, or from the right-bottom status bar to set the annotative scale value as 1:1.
CN Solution | ★中望CAD为什么外部参照插入后线型比例变了 |
---|