★How to insert blocks in ZWCAD

Issue: 

How to insert a block in ZWCAD?

Solution:

1. Click the menu Insert → Block (INSERT command), select the block you want to insert, tick Specify on Screen at the Insertion Point, and click Insert.
   
2. Choose the insert point in the drawing to insert the block.
   
3. When inserting a block, you can set the ratio of the inserted block, for example, input the ratio of the X direction as 0.2, then the block graphics will be reduced to 0.2 times in the X direction.
   
4. If the rotation angle is set to 30, the inserted block will be rotated 30 degrees counterclockwise according to the direction of the original drawing.