★★How to set the stock allowance to one side when adding the stock

Issue:

When the stock dimensions are fixed and the allowance on one side is known. How do I set the stock allowance to the side when adding stock?

Solution:

In ZW3D WuKong 2027, we can lock the limits of Z-. Enter the desired stock height. The system will then automatically calculate the Z+ limit.

Note: We can quickly create the machining coordinate system by selecting any yellow key point on the stock.

★★How to set the stock allowance to one side when adding the stock：https://confluence.zwcad.com/pages/viewpage.action?pageId=334135754